Square Lashing

From Scouts Canada Wiki
Revision as of 12:37, 28 August 2018 by SteveMatheson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
TiedUpInKnots.png

Use: The Square Lashing is used to bind two poles together. The lashing is designed to be load bearing and can be used to create scaffolding. Although the two poles usually cross each other at 90 degrees, the Square Lashing may be used when the angle between the two poles is as little as 45 degrees,

Start with a Clove Hitch around one pole. Twist short end around long and wrap the rope around both poles, alternately going over and under each pole about three or four turns. Tighten the lashing by surrounding it with three or four frapping turns. Finish with two or three tight half hitches.

See also: